主管单位:中华人民共和国工业和信息化部
主办单位:西北工业大学  中国航空学会
地       址:西北工业大学友谊校区航空楼
30CrMnSiA缺口试样低周疲劳寿命研究
作者:
作者单位:

西北工业大学

作者简介:

通讯作者:

中图分类号:

V214.1;O346.5

基金项目:

陕西省自然基金(2017JM1027);中国航天科技集团公司航天科技创新基金


Low cycle fatigue life prediction of 30CrMnSiA notched specimens
Author:
Affiliation:

Northwestern Polytechnical University

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    缺口会导致严重的应力集中,并降低结构的使用寿命,研究缺口部位的低周疲劳寿命具有重要意义。基于弹塑性全量理论建立30CrMnSiA材料的弹塑性本构关系,采用损伤力学-有限元法预测30CrMnSiA 材料缺口试样的低周疲劳寿命,并与相应的试验结果进行对比。结果表明:基于弹塑性全量理论建立的弹塑性本构关系方法合理,采用损伤力学方法得到的疲劳寿命预测结果基本满足工程实际要求,该方法可用来对30CrMnSiA缺口试样进行低周疲劳寿命预测。

    Abstract:

    The elastic-plastic constitutive function of 30CrMnSiA steel is presented based on the total theory of plasticity, and the low cycle fatigue life of 30CrMnSiA notched specimens is predicted by damage mechanics-finite element method. The results are compared with the corresponding experimental results. The results show that the elastic-plastic constitutive relation method based on the total elastic-plastic theory is reasonable, and the fatigue life prediction results basically meet the engineering requirements. The low cycle fatigue life prediction of 30CrMnSiA notched specimens can be carried out based on the damage mechanics method.

    参考文献
    相似文献
    引证文献
引用本文

谢伟,周慕莹,齐紫玉.30CrMnSiA缺口试样低周疲劳寿命研究[J].航空工程进展,2019,10(4):542-549

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-09-27
  • 最后修改日期:2018-12-11
  • 录用日期:2018-12-14
  • 在线发布日期: 2019-08-24
  • 出版日期: